
Đế giữ chai Parametric - Phiên bản IKEA SKADIS
- Downloads
- 8,349
- Likes
- 2,478
- Views
- 32,619
- Remixes
- 1
- Comments
- 0
Files 24 50.6 MB
- Parametric_bottle_Holder_SKADIS_0.6n_0.3mm_PETG_MK3S_4h9m_1765621239.gcodeGCODE · 10.2 MB
- Parametric_bottle_Holder_SKADIS_0.6n_0.3mm_PETG_MK3S_5h0m_1765621241.gcodeGCODE · 11.4 MB
- Parametric_bottle_Holder_SKADIS_ID40_5mm_1765621217.stlSTL · 969.5 KB
- Parametric_bottle_Holder_SKADIS_ID45_7mm_1765621220.stlSTL · 1 MB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #139904
- Category
- DIY
- Published
- Tags
- holder
- ikea
- skadis
- pegboard
- bottle
- can
- ikeaskadis
- skadisikea
- skadisholder
- bottleholder
- pegboardmount
- skadismount
- silicone
- spray
- waterbottle
- canholder
- spraypaint
- spraycan
- petbottle
- pegboardhook
- skadishook
- bottles
- sodacanholder
- winebottle
- beercanholder
- spraycanholder
- spraybottle
- beerbottle
- wd40
- pegboardadapter
- spraybottleholder
- pegboardclip
- aerosol
- wd40holder
- beveragecanholder
- garbagecanholder
- aerosolcanholder
- wd40can
- aerosolcan
- oilcanholder
- aerosolholder
Description
edit 25/2024: Added 5 more sizes based on requests i received, hope it helps !
edit 04/2023:
I made TWO parametric remix that you need if you want to save space on your board:
SKADIS SIDE HOLDER (left & right)
SKADIS TOP HOLDER
https://www.printables.com/model/456113-parametric-bottle-holders-ikea-skadis-side-version
https://www.printables.com/model/463276-parametric-bottle-holders-ikea-skadis-top-version
I remixed my previous bottle holder to make it compatible with the IKEA SKADIS system.
Here are the variations I have printed & installed so far:
Bottle Diameter OD
SKADIS Holder Diameter ID
Example
D 40.00 mm
D 40.50 mm
Clipper Lighter gas
D 45.20 mm
D 45.70 mm
OIL 100ml
D 49.00 mm
D 49.50 mm
silicone/glue cartridge…
D 53.00 mm
D 53.50 mm
WD40, Grease spray 200ml/250ml
D 57.75 mm
D 58.25 mm
WD40 300ml…
D 60.00 mm
D 60.5 mm
a request
D 61.50 mm
D 62.00 mm
a request
62.00 mm
D 62.50 mm
a request
D 66.20 mm
D 66.50 mm
Standard BEER/SODA CAN 330ml
Standard Spray Paint 400ml…
D 71.50 mm
D 72.00 mm
request
D 72.00 mm
D 72.50 mm
Chilly thermos bottle v1
D 73.50 mm
D 74.00 mm
a request
D 72.50 mm
D 73.00 mm
a request
D 74.50 mm
D 75.00 mm
a request
D 75.00 mm
D 75.50 mm
a request
D 75.50 mm
D 76.00 mm
Chilly thermos bottle v2
D 80.00 mm
D 80.50 mm
Isopropanol 1000 ml
D 81.50 mm
D 82.00 mm
a request
D 82.00 mm
D 82.50 mm
a request
On the design:
- Holder diameter is 0.5mm higher than bottle diameter for perfect/easy fit.
On the Freecad file:
- Display Spreadsheet
- Modify cell highlighted in the screenshot
- Do not add the 0.5mm gap, the spreadsheet calculates it on its own (space cell)
- If model can't generate, delete last chamfer/filet (topology bug)
If you can't work on the Freecad file, I'll be happy to add a variations to that list.
Hope it helps !
Other related model:
For cylindrical bottle IKEA IVAR holder, have a look at my previous model: https://www.printables.com/model/259673-parametric-bottle-holders
For rectangular bottle IKEA IVAR holder, have a look at my more recent parametric remix: https://www.printables.com/model/271053-parametric-rectangular-bottle-holders
Print spec
- Formats
- fcstdgcodestl
- Model files
- 24
- Total size
- 50.6 MB
- Largest file
- 11.4 MB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-

-
New -

-

-

-



