
Hộp Cứng Theo Tham Số (FreeCAD)
Remix of Hộp Công Cụ Miễn Phí Dành Cho Người Dùng Việt Nam By Whity
- Downloads
- 1,807
- Likes
- 235
- Views
- 6,103
- Remixes
- 10
- Comments
- 0
Files 9 11.2 MB
- RuggedBoxCopyV16_1767507068.stlSTL · 1.2 MB
- RuggedBoxCopyV16_1767507069.stepSTEP · 737.4 KB
- RuggedBoxCopyV16_1767507070.fcstdFCSTD · 1.3 MB
- RuggedBoxCopyV15TrayA_1767507071.stlSTL · 1.5 MB
Make a variant with AI
Build another version of this model.
Remix versions 10
Hộp Rugged cho Mamod SE.2a kèm đồ tiếp tếBytorch_1785844 · 11/05/2026
Hộp đựng Nano VNA V2 “Black & Gold”Byelfrinjo_99062 · 04/29/2026
Hộp Rugged Wera Screwdriver Set Case (Logo nhiều màu + khay 6 tua vít)ByPilgrim_189557 · 04/29/2026
Hộp Đựng Thẻ Bài Rugged Box (4x6 Inch Toploader) Chắc Chắn, Bền BỉByJLes · 04/20/2026
Details
- Model ID
- #139121
- Category
- DIY
- Published
Description
Remix of Rugged Box V1 from @Whity + @Yanev recreated with FreeCAD 0.21.1 for practice. Spreadsheet included in file. Feedback is welcome.
Three model options:
- RuggedBoxCopyV15.FCStd = base model, no tray
- RuggedBoxCopyV15TrayB.FCStd = non-removable tray
- RuggedBoxCopyV15TrayA.FCStd = removable tray
Parts list:
- 1 x lid
- 1 x box
- 2 x latches
- 6 x 3mm x 30mm screws
- 1 x removable tray (optional, see file list)
My Print Parameters:
- PLA
- 0.3mm layer height
- 2 perimeters
- 15% infill
- brim enabled
- no supports
Snug tolerance (0.25mm) for removable tray -- adjust according to your printer's accuracy. Note: installing foam in lid will keep contents from mixing when upending box or placing on its side.
version 16
Added seal to base model (no tray), otherwise no changes.
version 15
Fixed thread dimension error on all model versions (thank you Pilgrim)
Added STEP files
version 14_2
Added a second tray option:
- RuggedBoxCopyV14TrayB.FCStd = non-removable tray
- RuggedBoxCopyV14TrayA.FCStd = removable tray
NOTE: malformed constraints (broken model resulting from “flipping”) still possible due to large, individual size changes ie InnerBoxBottomHeight from 75 to 30. However will successfully resize from 75 to 30 in smaller increments ie increments of 5. Have not yet found another solution.
version 14_1
Addressed a few sketching errors resulting in TNP failures. v14 should be fully parametric and 100% "stable”. Design is otherwise unchanged. Any issues please let me know :()
version 12
Added removable tray model.
version 10
Original base model
Print spec
- Formats
- fcstdstepstl
- Model files
- 9
- Total size
- 11.2 MB
- Largest file
- 1.8 MB
0 comments
You may also like 12 models
See all-

-

-

-

-

-
New -

-

-

-

-

-


