
Stealth Press 1 — Máy ép chèn nhiệt (phiên bản cũ)
- Downloads
- 14,613
- Likes
- 4,785
- Views
- 129,028
- Remixes
- 20
- Comments
- 0
Files 25 135.4 MB
- top_x1_r1.1_1765667434.stlSTL · 4.9 MB
- center_x1_r1.1_1765667435.stlSTL · 546.7 KB
- leg_x1_r1.1_1_1765667436.stlSTL · 773.2 KB
- buildplate_x1_r1.1_1765667437.stlSTL · 642 KB
Make a variant with AI
Build another version of this model.
Remix versions 20
Giá treo phụ kiện cho Stealth Press - Sắp xếp gọn gàng, tiện lợiByMatthewLaBerge · 05/03/2026
Khay insert tip cho iron & giá đỡ iron 17mm (Iron Insert Caddy & 17mm Holder)Byroboreloaded_273051 · 05/03/2026
Ngàm Stealth Press cho mỏ hàn 20mm (kèm file STEP) kiểu SREMTCHByDavidD · 05/03/2026
Ngăn kéo có nam châm cho Stealth Press (HSIP) gọn gàng tiện lợiBy3DPMAMSIH · 05/03/2026
Details
- Model ID
- #137430
- Category
- DIY
- Published
- License
- GNU General Public License v3.0
Description
Stealth Press 1
Important!
As of November 26, 2024, this revision of Stealth Press 1 is considered a legacy version.
We recommend downloading and building the Stealth Press 1S version.
Stealth Press 1 revision will remain accessible for reference purposes, as it is linked in numerous locations and has multiple community mods.
This ensures continued access to Stealth Press 1 files for those who need them.
About Stealth Press 1
Stealth Press 1: Precision DIY Heat Set Insert Tool
Stealth Press is a highly accurate, mostly 3D-printed heat set insert tool compatible with generic, TS100/101, and Pinecil soldering irons. Key features:
Uses 300mm MGN12H linear rail for precision, simplifying construction;
Integrated, printable build plate for enhanced accuracy;
KEY-BAK key reel with kevlar belt loop for durability (1 million or more pulls);
Unique design improvements over similar DIY projects;
This user-friendly tool offers professional-grade performance without the need for costly extrusions.
Bill of Materials and Sourcing guide
Kits
Buy kits
Vendor
Kit version
Product page
Region
KB3D.com
1S
US
Veetec3D
1S
EU, INT
Blurolls3D.com
1
INT
Blurolls [on AliExpress]
1
INT
Toaiot [on AliExpress]
1
INT
Self sourcing
Part
Size / Standard
QTY
Source
M3 bolts
M3x8 SHCS
40
M5 bolts
M5x25 SCHS
2
Bearings (F = flanged)
F695-2RS
4
M3 threaded heat set inserts (M3*OD:5_*_L:4)
M3x5x4
30
Linear rail with bearing
MGN12H
300mm
1
Retractable device (Key-Bak®)
Super48 36" 13oz
1
Retractable device (Budget savvy alternative)
500g version
Soldering irons and adapters
Soldering irons (supported variations)
Type
Source
Variation 1
Generic
Variation 2
TS101
Variation 3
Pinecil
Adapters
Type
Source
Soldering iron adapters
Generic
Soldering iron adapters
TS101 or Pinecil
Printed Parts
Parts
QTY
Stealth Press printed parts
16
Assembly manual
Download FULL AND FREE assembly manual with visuals and a step-by-step guide.
Video build guides
Iconic FAB video build guide
Live build by Nero3D
Live build by ModBotArmy
Supported soldering irons
Generic, TS100/101 or Pinecil.
Print guidelines
Here are print guidelines for you to follow in order to have decent success with printing parts:
3d printing process
FDM (fused deposition modeling)
Infill type
Grid, Gyroid, Honeycomb, Triangle or Cubic [1]
Material
ASA, ASA-CF, ABS, ABS+, ABS-CF
Infill percentage
40% - 60% [2]
Layer height
Recommended: 0.2mm
Wall count
Recommended: 4
Solid top/bottom layers
Recommended: 5
Extrusion width
Forced 0.4mm
Side notes to the print guidelines
[1] You can succeed with Support cubic infill type (slicer support may vary).
[2] As low as 25% infill for all parts if are aiming for faster print speeds and less filament usage. Consider using 60% of infill for build plate part to ensure it's not sagging over time.
PLA, PLA+, and PETG are also considerable filament choices. However, take into account that soldering iron radiates some indirect heat. The usage of less temperature-stable filaments may result in part deformations over time.
It is recommended to use PETG ir ideally - ASA or ABS at least for “arm” and “iron mount” parts.
A wall count of 4 is an absolute must to ensure the structural integrity of the parts. There is no need to go over the top with this. 4 are OK for this particular build.
File naming for printed parts
The parts use this naming convention:
Primary color
These files will have nothing at the start of the filename.
Example: buildplate_x1.stl
Accent color
Files have “[a]” to the front of any STL file that is intended to be printed with accent color.
Example: [a]_bushing_x1.stl
Count of parts
Files have “x1” to “x4” at the end of any STL file. The number represents the count of identical parts to be printed.
Example: [a]_m5_1mm_spacer_x4 (In this case you will need to print 4 identical spacers).
How to support the project
- If you like this project press like and download model files.
- If you find this useful and want to see more from Iconic FAB first - consider following.
- If you really like this and find it very useful support project with amount of your choice.
Credits and acknowledgements
Special thanks to Stefan and Alexander from CNCKitchen for backing this project by providing a generous set of soldering-iron tips and heat-set inserts for building and testing purposes.
Here is the list of other open-source projects used for sourcing multiple CAD parts. Models are used as-is or modified to fit the project purpose and design:
- VORON TAP: https://github.com/VoronDesign/Voron-Tap [CAD models for heat-set inserts and bolts]
- VORON Switchwire: https://github.com/VoronDesign/Voron-Switchwire [Base for remix of KEY-BAK mounting parts]
- Ender SW: https://github.com/boubounokefalos/Ender_SW [Base for remix of Support arms]
Change log
Date
Changes
15.08.2024
Complete update to information on this page, keeping it up to date.
07.07.2024
Version for Generic soldering iron mount added to support irons with 17mm (OD).
27.03.2024
Alternative version for build-plate WITHOUT sacrificial support is added as file: [extra]_no_sacrificial_support_buildplate_x1_r1.1.
This version of build-plate should be printed with classic or tree supports.
Serves as a back-fall/last resort to resolve reported issue with current sacrificial support sticking to the build-plate base too well, which can be result of over-extrusion or something else, unknown.
Do not print both - regular and alternative version, you only need one.
14.11.2023
STLs for variations of generic soldering iron mounts were added supporting 18mm and 19mm (OD) irons.
12.11.2023
Minor update preparing for Dremel Add-On release. leg_x1_r1.1.stl is updated to leg_x1_r1.1_1.stl removing safety buffers.
This was necessary to ensure cross-compatibility in between base parts and multiple add-ons in development.
04.11.2023
Printed files updated to R1.1. with cosmetic changes to ALL parts. (Note that mechanical parts - BOM is not affected, zero changes there.)
What's new:
All heat-set insert hole sizes are now reworked to 4.7mm solving the issue of being too tight and pushing out excessive plastic. Holes now have 0.4mm fillets on both the entry and the end.
Wire strain reliefs now have an extra opening for the M3 bolts solving an issue that the bolts were too hard to fit in.
The LEG plate now has specific safety buffers preventing linear rail bearing carriage accidental slide-offs (Sometimes referred to as dropping balls :) Do not do that.)
Ton of other incremental improvements optimizing general printability of parts even better than it was in Rev.1.0
10.10.2023
.STEP files added for soldering iron mounts only (for all 3 currently supported types - Pinecil, TS100 / 101, and “Generic”.
26.10.2023
Minor changes in BOM - Key-bak Super48 36" 13oz variant as recommended.
11.10.2023
Initial version (Rev1)
Print spec
- Formats
- pdfstepstl
- Model files
- 25
- Total size
- 135.4 MB
- Largest file
- 91.6 MB
0 comments
You may also like 12 models
See all-
New -

-
New -
New -

-

-

-

-

-
New -
New -


