Tản nhiệt extruder cho MK3s

By DanielK

Downloads: 157
Likes: 42
Views: 1,806
Remixes: 1
Comments: 0

Download all (.zip)· 2 files · 2.4 MB· 2.4 MB

Files 2 2.4 MB

mk3s_0.2mm_PETG_MK3S_1h13m_1765741145.gcodeGCODE · 1.7 MB
mk3s_1765741144.stlSTL · 628.6 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

Bộ làm mát Extruder MK3s - Phiên bản quạtByDanielK · 07/01/2025

See all 1 remix

Details

Model ID: #136101
Category: Máy In 3D
Published: 07/01/2025
License: Creative Commons — Attribution — Share Alike
Tags: mk3s
heatcreep
noheatcreep

Show more tags Show fewer tags

Description

This cooler will reduce the temperature of the extruder by about 8° Celsius. Especially suitable when the printer is troubled by "Heat Creep".
It mainly helps when the printer is inside an enclosure.

Suitable for example "PLA Prusa Galaxy Black" or "PLA Sunlu WOOD - LowTemp". In general, it is suitable for all filaments that do not benefit from higher temperatures inside the enclosure.

Don't forget to use thermal paste between the stepper motor and the heatsink. I recommend "arctic mx-4" paste

Used cooler - "nema17 cooler - 40x40x11mm"