Skip to main content
F3D
Pulley nhỏ 0.34" cho dây thừng và dây điện 1

4 images

Mỹ Thuật

Pulley nhỏ 0.34" cho dây thừng và dây điện

By JasonJohnson_340098

Downloads
114
Likes
55
Views
635
Comments
2

Files 2 7.6 MB

  • Pulley_Housing_1767023625.stlSTL · 5.4 MB
  • Pulley_1767023631.stlSTL · 2.1 MB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Designed with minimal printed parts (3): 2ea Pulley Housing and 1ea Pulley Roller. This unique design prevents the rope from riding up and over the pulley and binding between the interior of the pulley axle and bearing. Recommended to print flat so layer lines are long and strong.

Unequally designed for the Amateur Radio Community for hoisting antennas into a tree etc. with minimal use of electrically conductive metals that, can reflect and absorb the radio waves and consequently interferes with their transmission.

No Tools / fastener (Bolt/Nut) disassembly is not required to load or remove rope. simply rotate the two halves to the 3 and 9 o'clock positions.

No Supports Needed

Print PLA, PETG, ASA, ABS other stronger technical material.

Requires

2ea 2x5x2.5mm Miniature Ball Bearings

1ea 8mm x 38mm L bolt

1ea 8mm locknut

2ea washers

Requires 1ea bolt, 1ea nut, and 2ea washers needed for assembly.

0.4mm or 0.6 mm nozzle, 2 or 3 walls per your preference, 14% to 20% your favorite infill.

73

V/r, Jason

KBØEOD

Read more Show less

Print spec

Formats
stl
Model files
2
Total size
7.6 MB
Largest file
5.4 MB

2 comments

See all