Skip to main content
F3D
Bambu Lab - Đế Đựng Dao Cạo, Keo Thỏi & Keo Lỏng - Ba Phiên… 1

10 images

Máy In 3D

Bambu Lab - Đế Đựng Dao Cạo, Keo Thỏi & Keo Lỏng - Ba Phiên Bản

By Damian27

Downloads
220
Likes
48
Views
952

Files 10 4.1 MB

  • Bambu_Lab_-_Stand_For_Scraper_-_Liquid_and_Stick_Glue_-_All_Project_1767687301.3mf3MF · 1 MB
  • Bambu_Lab_-_Stand_for_Scraper_and_Glue_Stick_-_No_Logo_1767687302.stlSTL · 113.9 KB
  • Bambu_Lab_-_Stand_for_Scraper_and_Glue_Stick_-_Protruding_Logo_1767687303.stlSTL · 462.3 KB
  • Bambu_Lab_-_Stand_for_Scraper_and_Glue_Stick_-_Color_Logo_1767687303.stlSTL · 462.3 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#135380
Category
Máy In 3D
Published

Description

Hello Everyone
 

This time I am sharing stands for scraper and Bambu Lab glues in liquid and stick versions. The scraper and glue stands are identical in design to my other Scraper Stand project. It has the same height. It only differs in width and length. The first without a logo, the second with a protruding logo and the third with a logo to color. At the bottom of the stand is located there is space for 4 non-slip silicone pad with a maximum diameter of 8mm. The height of the silicon pad I used is 1.5 - 2.5mm. They prevent the stand from moving when next to a working printer. You can buy them in any large DIY store or furniture accessories store for about 1.50 euros for 50 pieces. Their use is not mandatory. You can download individual files for printing or a ready-made colorful .3mf project containing all versions and change only the colors of the filaments.

When you complete the project, please share a photo and a comment. Thank you and have a nice day.

You can also download my new scraper model to match this project :

https://www.printables.com/pl/model/453705-bambu-lab-scraper-double-sided-logo

Versions Available : 

Bambu Lab Stand for Scraper and Glue Stick :

  • No Logo - Protruding Logo - Color logo
  • Dimensions : 82.2 x 43.3 x 40mm

Bambu Lab Stand for Scraper and Liquid Glue :

  • No Logo - Protruding Logo - Color logo
  • Dimensions : 90.6 x 44.6 x 40mm

Bambu Lab Stand for Scraper - Stick and Liquid Glue :

  • No Logo - Protruding Logo - Color logo
  • Dimensions : 126.8 x 44.6 x 40mm 

IMPORTANT - READ:
Please note that printing a stand with a colorful logo takes a long time. Consider choosing a version without a logo or a version with a logo but without color.
 

How to print ? :

  • Material : Any
  • Layer Height : 0.2mm
  • Wall Loops : 2-3
  • Bottom Layers : 3
  • Top Layers : 4
  • Infill : 20% (I print with 50% infill because I want it to be heavy and massive)
  • Seam Position : Back
  • Support : No
  • Brim : No

Read more Show less

Print spec

Formats
3mfstl
Model files
10
Total size
4.1 MB
Largest file
1 MB

0 comments

See all