Vỏ Bọc Tản Nhiệt Cho RAM DDR4

Are you tired of that oh so ugly ahh blank PCB RAM? I was so I made/remixed this. This little piece gently slides over the top of your ram so it doesn't look empty when it is in your pc. DISCLAIMER: My lazy self actually printed this so I could sell (still hasn't sold) some ram. I don't actually have a picture of it in the PC. This print will make your RAM 4mm thick (corsair vengeance DDR4 is around 7mm thick) so there is lots of clearance. This may not work if you have a radiator/fans that go in front of this print as it sticks out an extra 5 ish millimeters. It is such a small print that if it doesn't end up working, big deal. The piece goes into the ram by about 3.75mm I don't know why I chose this measurement, vs 4mm. It is designed to fit RAM about 1.3mm thick and 133.1mm long. NO SUPPORTS! This uses small ‘H’s that are super easy to pull out with clippers. As long as your printer can bridge 15mm or less, you're good!