
Cảm Biến Dây Tóc Inline Cho Đường Kính 1.75mm
- Downloads
- 62
- Likes
- 8
- Views
- 922
- Remixes
- 0
- Comments
- 0
Files 2 3.8 MB
- inline_sensor_rome_bill_1766340745.stlSTL · 3.2 MB
- inline_sensor_rome_bill_1766340747.STPSTP · 599.2 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #134164
- Category
- Máy In 3D
- Published
Description
This is an inline filament sensor you can use on any 3d printer. This was modified from a Helge Keck design for ROME
Print the model as set in the model file. Use supports for the bottom hole only. use 4 perimeters and print the threaded areas at 0.1mm layer height. 0.2mm layer height can be used everywhere else.
Hardware needed:
1x 5mm dia x 2mm thick magnet
1x 6mm dia carbon steel ball
1x microswitch: https://www.amazon.com/Cylewet-25Pcs-Switch-Arduino-CYT1073/dp/B073TYWX86/ref=sr_1_4? recommended for fit
2x bowden coupler (6mm thread): https://www.amazon.com/gp/product/B08QMRLPC5/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&th=1 recommended for quality
2x 2mm dia x 10-16mm long screws (16mm long if you want to add nuts as well)
2x 2mm locknuts (optional)
a.r. Adhesive (for holding magnet) (I use loctite 406)
a.r. 4mmx2mm ptfe tube
Print spec
- Formats
- stlstp
- Model files
- 2
- Total size
- 3.8 MB
- Largest file
- 3.2 MB
0 comments
You may also like 12 models
See all-

-

-
New -
New -
New -
New -

-

-

-

-

-

