Bản vẽ CAD EnderXY (Không chính thức)

Join the EnderXY community on Reddit:

https://www.reddit.com/r/EnderXY/

Uploaded: November 4, 2023

Reverse engineered CAD model for the EnderXY. Printer was dissasembled and each part measured and printed to compare for maximum accuracy, though it won't be 100% accurate as I don't have the original CAD model.

The only thing I didn't add was the spring nuts.

If you find any errors please let me know so I can re-measure/print that part and verify it.

Edit: The backplate to mount the hotend seems to be correct for the first batch only.

Update v1.0.03:

• Added 2 missing screws.
• Fixed minor issue with bed positon.

Update v1.0.08:

• Added 4 missing screws.
• Fixed a minor issue with Z alignment on lead screws.
• Remade the Z motor brackets to match the EnderXY ones.

Update v1.0.10:

• Fixed misaligned hole on “Rear Upper Brace”.
• Fixed a measurement on “Rear Upper Brace”.

Update v1.0.11:

• Fixed misaligned hole on “Rear Upper Brace”.

Update v1.0.17:

• Fixed length of the lead screws (now 290mm).
• Fixed minor measurement on "Belt Tensioner Mounting Plate" holes.
• Fixed minor measurement on the belt tensioner inner bracket.
• Cosmetic fixes on belt tensioner handle to correctly match stock.

Update v1.0.18

• Fixed the centre hole on the “Rear Upper Brace”.

Update v1.0.26

• Fixed misaligned holes on “Rear Lower Brace”.
• Fixed two misaligned holes on “Bottom Plate”.

Update v1.0.27

• Fixed misaligned hole on “Rear Upper Brace”.

I'm not affiliated with belt3dprinterkit.com or Aditiva3D but I wanted to see the community and support for the EnderXY grow. 

The core parts to the EnderXY are made from aluminium and are easy to bend/strip a thread so this will allow people to recreate/repair/improve the EnderXY.

If you want to purchase the kit to build your own EnderXY you can get it from https://belt3dprinterkit.com/products/enderxy-conversion-kit-for-ender-3-series

If you'd like to support my work you can here https://ko-fi.com/supavitax