Stream Deck / Macro Pad / Keycaps Ghi Âm - Tương Thích Đèn Nền (KeyV2)

Features

• A collection of backlit (or multi-colour) compatible keycaps for various recording/streaming/application-launching purposes, designed to be used with a macropad or stream deck. Based off rsheldiii's KeyV2 library
   
• OEM R4 profile keycaps (function row) with a Cherry MX stem
   
• All keycaps* can be printed on a standard FDM printer with a 0.4mm nozzle (but will obviously look better on a resin printer!)
  *Note: “MicMute.stl” has a high chance of breaking when pushing the legend in - I recommend using “Mic.stl” instead
   
• Keycap and legend fits together via friction - no glue needed

Print Guidelines

• Layer height: 0.1mm
  Supports: Yes, tree supports for the keycaps
  Infill: 100%
  Slicing Tolerance: Exclusive
   
• You will need to rotate the legends by 2.5° to lay them flat in your slicer (or use the ‘Align face to build plate’ option in Cura)

Post-printing

• Remove the supports from the keycaps and cut away the eight support structures at the bottom
   
• Press the legend into the keycap - it should be a very tight friction fit and might need pressing in with the handle of a screwdriver or similar object. Rest the keycap flat on a table to make sure that the stem doesn't break off

Why not try printing the keycap in transparent filament, then changing to opaque at 5.9mm to give a pudding keycap effect? Or print it however you want, I'm not your mum. Enjoy!