Skip to main content
F3D
Cải tiến và bổ sung bộ phận in VCORE3.1 1

4 images

Máy In 3D

Cải tiến và bổ sung bộ phận in VCORE3.1

By billyd

Downloads
28
Likes
5
Views
311

Files 12 2.4 MB

  • enclosure2_bowden_clamp_extended_bill_1765646476.stlSTL · 136.6 KB
  • enc2_spoolholder_3mm_more_space_from_frame_1765646477.stlSTL · 671.3 KB
  • vcore3_200_dc_regulator_mount_1765646478.stlSTL · 161.6 KB
  • lead_screw_motor_cage_back_trim_3mm_panel_thick_1765646479.stlSTL · 146.6 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

The enc2 bowden clamp extended is extended out from the enclosure for better alignment with the filament spool. It uses a 5mmx 50 bolt and 5mm 3030 tnut for mounting.

The enc2 spoolholder 3mm mod gives more space from the hardware on the frame to avoid it catching on the filament spool and causing jams. (This is for 3mm thick panels.)

The vcore3 dc regulator mount is for mounting a dc regulator for powering the raspberry pi. This is an original design, not a remix. The regulator it is intended for: https://www.amazon.com/dp/B085T73CSD?psc=1&ref=ppx_yo2ov_dt_b_product_details

The lead screw motor cage trim front and rear were made wider to allow for better coverage of the panel cutouts. These are for 3mm thick panels.

The IEC 3030 print was modified to work  better with this switch/power input device: https://www.amazon.com/button-Adapter-Connector-Socket-MXRS/dp/B082ZFRV1B/ref=sr_1_15?crid=2KJ2AA9J8ABU1&keywords=iec&qid=1695645547&sprefix=iec%2Caps%2C104&sr=8-15

I also include the step files if you want to modify further.

Read more Show less

Print spec

Formats
stlstp
Model files
12
Total size
2.4 MB
Largest file
671.3 KB

0 comments

See all