Skip to main content
F3D
Bộ Chuyển Đổi T-Track Cho Cưa Bàn 1

7 images

DIY

Bộ Chuyển Đổi T-Track Cho Cưa Bàn

Remix of Bộ chuyển đổi hướng dẫn cho máy cắt bàn V-Slot 20x60 và T-Tr... By kopringo_696058

By boycabrera

Downloads
59
Likes
17
Views
553

Files 2 5.9 MB

  • CE3E3V2_Jig_Mount_for_T_Track_1765676869.gcodeGCODE · 5.8 MB
  • Jig_Mount_for_T_Track_1765676868.stlSTL · 163 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Found this awesome STL for a Table Saw T-Track Adapter created by Michal@kopringo_696058 and really wanted to incorporate it into a Finger Jointing Jig I was designing. After using my calliper to measure the wide T-Track slot I decided to alter the original design to have zero wobble and I removed the front so that the Finger Joint Jig could sit flat against the T-Tack Adapter.

Since this is something I want to use on a table saw and with my router table, I will be printing this to be sturdy.

Printing Info: I printed flat on its side. You may want to adjust the STL to have it do the same. It will give you better adhesion to the buildplate and not rely too much on supports for stability.

Material: PLA

Print Temp: 202

Bed Temp: 55

Lines/Resolution: 0.2

Walls: 4

Infill: 40% or higher (either cubic or zig zag if you don't want to use as much material while maintaining strength)

Support: Tree (on Buildplate)

Read more Show less

Print spec

Formats
gcodestl
Model files
2
Total size
5.9 MB
Largest file
5.8 MB

0 comments

See all