
Vỏ Heltec V3 Meshtastic (1x 18650) có nút bập bênh
- Downloads
- 260
- Likes
- 25
- Views
- 3,751
- Remixes
- 0
- Comments
- 0
Files 4 298.2 KB
- boardholder_1766032456.3mf3MF · 33.3 KB
- rocker_button_1766032457.3mf3MF · 54.7 KB
- FRONTPLATE_1766032458.3mf3MF · 82.8 KB
- BACKPLATE_1766032459.3mf3MF · 127.4 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #128427
- Category
- Dụng Cụ Tiện Ích
- Published
Description
*This is a work in progress.
Context:
I was looking for a case for the Heltec V3 LoRa board to use with meshtastic, and I had pretty much determined the cases by @tonyg were the best option, but I wanted one that could be more weather resistant. This case is a first step towards that. It is designed so that the only openings are situated at the top and can be covered with a TPU insert (not created yet) but still retain button functionality.
The buttons are still operational because they work off a rocker switch that sticks out the top.
Print tips:
- You need two rocker buttons, and one must be mirrored
- Print the front plate face down. A textured bed makes it look nicer
How to assemble:
- Use pliers to force the rocker buttons into the top of the front plate. A drop of oil helps too.
- Take the board and put it in the board holder. It should friction fit.
- Attach the antenna mount to the back plate and tighten it down.
- Plug the antenna connector onto the board.
- Put in the battery and connect the leads to it however you can.
- Friction fit the board holder into the front plate.
- Plug the battery in.
- Add some padding (I used crumpled paper) to make sure the battery can't move.
- Fold the two halves together making sure all the wires stay inside and are not pinched.
- Fasten the halves together with 3x M2x20 and 1x M2x16 screws/nuts.
I haven't experimented with waterproofing yet but the idea is to put some silicone around the edges of the two halves and make a TPU insert to keep the plug and sides of the buttons covered.
Print spec
- Formats
- 3mf
- Model files
- 4
- Total size
- 298.2 KB
- Largest file
- 127.4 KB
0 comments
You may also like 12 models
See all-

-

-

-
New -

-
New -
New -

-

-

-
New -


