Giá đỡ DIN cho rơ le ô tô 200A

By kjs_234070

Downloads: 23
Likes: 9
Views: 459
Remixes: 0
Comments: 0

Download all (.zip)· 6 files · 71.3 KB· 71.3 KB

Files 6 71.3 KB

Relay-DIN-Mount-base_1768342925.stlSTL · 19.9 KB
Relay-DIN-Mount-clamp_1768342926.stlSTL · 14 KB
1TE-bank-base_1768342927.stlSTL · 6.1 KB
1TE-bank-clamp_1768342928.stlSTL · 6.7 KB
2TE-blank-base_1768342928.stlSTL · 11.7 KB
2TE-blank-clamp_1768342929.stlSTL · 12.8 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #124903
Category: DIY
Published: 06/19/2025
License: Creative Commons — Attribution — Share Alike

Description

For my solar system I needed a way to mount a 200A automotive relay on a DIN-rail. The clamp isn't spring mounted but held in place by two M4x12 screws and nuts. A bit less convenient to install but it is hopefully a one time operation only. The relay is mounted with an M6x10 screw and nut. The nuts are held in place with a drop of superglue.

As I don't trust Chinese specifications I used a 200A relay despite the fact that it has to handle 40A max. May prevent that I have to change it to often.…

Printed in PLA with a 0.4mm nozzle, line width 0.5mm and height of 0.3mm. The base is printed with support. Infill is 15% cubic.

As many of the breakers aren't tight on the rails I added a small one width unit part which allows to lock them in place (1TE-.......stl)

2024.01.22 added blank unit for two width units (36mm)