Skip to main content
F3D
Giá đỡ filament cho máy in 3D Tina2 1

2 images

Máy In 3D

Giá đỡ filament cho máy in 3D Tina2

By oxigen27

Downloads
206
Likes
16
Views
808
Comments
2

Files 1 531.7 KB

  • Tina2FilamentGuide_1766227498.stlSTL · 531.7 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Tina2 Filament Guide

If, like me, you have a Tina2, but you're using a 1kg filament spool, then you have an external spool holder, or an extension of the original one.

In this situation I noticed that the extruder sometimes struggles to pull the filament, due to the angle the filament has. This would sometimes result in under-extrusion as well. With this little add-on, I was able to solve the problem, forcing the filament to enter the extruder from below, and not from behind.

Print Settings

Material: PLA
Layers: 0.2 mm
Raft: No
Support: yes (to be safe, maybe you can actually print it without any)
Infill: 30%
Walls: 4

After Print

I used double-sided tape to stick it to the side of the printer, just under the extruder.

I sanded a bit the inner part of the ring after removing supports to reduce friction. To reduce it even more i put a bit of tape on the inside of the ring. The tape helps as it's smooth, but it's not really necessary in my opinion.

Read more Show less

Print spec

Formats
stl
Model files
1
Total size
531.7 KB
Largest file
531.7 KB

2 comments

See all