
Kẹp Ikea KOPPLA cho thanh dầm 30x30
- Downloads
- 20
- Likes
- 5
- Views
- 188
- Remixes
- 0
- Comments
- 0
Files 2 761.1 KB
- power_filter_holder_1765838488.stlSTL · 219.7 KB
- power_filter_holder_v1_1765838489.f3dF3D · 541.4 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #121775
- Category
- Đồ Gia Dụng
- Published
- License
- Creative Commons — Public Domain
Description
A simple thing to attach an ikea copla (60412017) extension to a 30x30 bed beam. There are ovtersts for two M3 bolts at the top, which can be attached via a fusible sleeve or via a nut on the opposite side.
Designed for printing without supports. It must be printed with 100% fill (it is better to set the number of perimeters to 10 than to rely on fill). Low fill values are likely to break when trying to put on the beam by sliding the legs apart. You can try to reinforce the joint with a full fill modifier if you want to save time or plastic.
Modeled in Fusion360, not very parametric, but you can change the dimensions.
Print spec
- Formats
- f3dstl
- Model files
- 2
- Total size
- 761.1 KB
- Largest file
- 541.4 KB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-
New -

-

-
New -

-


