Dao Xacto Hobby Mỏng

Thin Hobby Xacto Knife

Features

• compatible with no11 blade
• blade cover include

Print Instructions

• be careful
  • this is a very tight fit, your printer must be well calibrated
  • the classic perimeter generator produces better threads
  • for best result, print each part separately
  • try to fit the test blade to avoid injury 
  • print the test handle and collar first
• print settings
  • use default 0.20mm QUALITY PrusaSlicer Settings
    • avoid crossing perimeters : recommended
    • nozzle diameter : 0.40 mm
    • layer height : 0.20
    • filament : PETG
    • supports : none
    • brim : none
• test_handle, thin_handle and collar
  • classic perimeter generator : recommended
  • perimeters : 3 or 4
• blade_cover
  • default 0.20mm QUALITY PrusaSlicer Settings
• test_blade
  • default 0.10mm DETAIL PrusaSlicer Settings

Assembly

• you may need to clean the chuck jaws 
  • pass an Xacto blade between each jaws 
    • be careful not to break anything ;-)
• screw the collar to the chuck
  • make sure the collar is facing the right way
  • turn clockwise to tighten the chuck (and lock the blade in place)
  • turn counterclockwise to loosen the chuck (and release de blade)
• insert the blade into the jaw
  • make sure you insert the blade into its slot
  • tighten chuck until blade is secure
• clip the blade cover to the collar