Giá đỡ ray DIN Fly TMC5160 V1.2

Fly TMC5160 V1.2 DINrail mount

Compact DINrail mount for FLY TMC5160 V1.2 or V1.5 if you use a VORON printer and just need two, instead of four drivers.

12V 4010 axial fans can be clipped inside of the mount if your flow settings are correct.
Noctua NF-A4x10 wont fit because of the rubber bushings.
A Noctua version will be available in the future if needed.

• Added 4020 fan version (not tested yet)
• Added +5mm spacer version
• Added 5mm spacer (quick and dirty, scaled 60mm version to 40mm and added negative volumes to enlarge the holes, I used the spacer from AidsOnWheels )
   

Use one pcb clip from VORON repository to attach bottom bracket to the DINrail.
LINK for pcb clip

Threaded inserts are not needed, just use M3 screws directly.

Additionally needed

• 2x M3 countersunk socket head screws for pcb clip
• 4x M3 button head screws or socket head caps to mount PCBs with Bottom
• 4x M3 countersunk screws to connect bottom with top
• no screws are needed for the fans

I recomend to use supports in the middle of the top part.