In 3D - Các tag ví dụ mẫu lưới in

These tags demonstrate 10 different infill patterns. I've found them useful for teaching, especially beginners.

Fastest way to fab: run the gcode on an i3Mk3S/S+

For other printers: load the .3mf file in Prusaslicer as a “Project”. That specifies the per-tag infill pattern as well as the colour change at around the 3.4mm layer and the print pause at around 4.4mm where you should stop the job to leave the infill patterns exposed.

Adding other infill patterns: the .stl file has a blank tag and cylinder object that can be used to create other tags.