Skip to main content
F3D
Adapter cuộn Polymaker / Polyterra có khe RFID… 1

2 images

Máy In 3D

Adapter cuộn Polymaker / Polyterra có khe RFID (cho cuộn tái sử dụng / AMS của Bambu Lab)

Remix of Adapter Cuộn Spool Bambu Lab Cho Cuộn Spool Giấy PolyTerra Polymaker By philltran

By JamesHolmes_1251567

Downloads
35
Likes
6
Views
911

Files 3 211.5 KB

  • Polymaker_Spool_Adapter_with_RFID_v1_1765827110.f3dF3D · 68.8 KB
  • Polymaker_Spool_Adapter_with_RFID_v1_1765827111.3mf3MF · 75.4 KB
  • Polymaker_Spool_Adapter_with_RFID_v1_1765827111.stlSTL · 67.4 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Originally posted from the original by philltran - https://www.printables.com/model/339966 - additional steps in italics.

Each spool requires one core adapter. 

  • Remove the RFID tag from the original Bambu Lab cardboard core that you wish to reuse - make sure to remember which side of the tags face outwards
     
  • Remove one cardboard sides off of the original spool.
  • Place the spool on a sturdy surface with the open side facing up. 
  • Insert the adapter into the center of the spool. Make the edge of the adapter flush with the edge of the cardboard core. The adapter has a slot to line up with the notch on the Bambu reusable spools. Make sure slotted side of the adapter is facing out
     
  • Add the RFID tag removed earlier through the thin slot - it may be quite tight if some glue remains from the original tag. Fold the tags up to lie flush with the new filament
     
  • Separate the Bambu reusable spool into two parts. 
  • Insert the Bambu spool section with notch onto the spool core so that the notch lines up with the slot on the adapter. 
  • Holding the spool together firmly, flip over the spool so that the remaining cardboard side faces up. 
  • Remove the remaining cardboard sides off of the spool.
  • Insert the remaining Bambu spool section onto the spool core.
  • Rotate the Bambu reusable spool sections until the two sections “click” together. 

Originally remixed from Dustin Tebo's Protopasta Bambu Lab spool adapter (https://www.printables.com/model/320144-bambu-lab-spool-adapter-for-protopasta-spools/remixes)

Direct remix of philltran's Bambu Lab Spool Adapter for Polymaker PolyTerra Cardboard Spools

Read more Show less

Print spec

Formats
3mff3dstl
Model files
3
Total size
211.5 KB
Largest file
75.4 KB

0 comments

See all