Skip to main content
F3D
Chân Bàn Ghế Có Thể Chỉnh Độ Cao 1

3 images

Đồ Gia Dụng

Chân Bàn Ghế Có Thể Chỉnh Độ Cao

By QuicksilverForge

Downloads
73
Likes
22
Views
558

Files 4 688.2 KB

  • 5-8_Top_1765825005.3mf3MF · 64.7 KB
  • 5-8_Bottom_1765825006.3mf3MF · 172.2 KB
  • 1_Bottom_1765825007.3mf3MF · 174.5 KB
  • 1_Top_1765825008.3mf3MF · 276.9 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

I needed some adjustable feet for a breakfast nook(similar to this: https://www.amazon.com/Linon-White-Breakfast-Dining-Ardmore) that I have on some uneven flooring.  I also didn't like that the bottom of it either wasn't finished, or the finish has worn off.  

You do need to obtain some m6 and m10 standard hex bolts and nuts to make these.  For mounting them, I used standard #8 hex head screws, but any #8 screw with a flat bottom on the head should work.  Once mounted, they may be adjusted by hand, or by adjustable wrench.

For my specific nook, the bench has panels that are 5/8"(~16mm), and the table has 1"(~25mm) thick panels, so I designed these to fit on the bottom of those panels without sticking out on the sides.  The minimum height is about 1 3/16"(~30mm) for the 5/8" foot with a m6x30mm bolt, and about 1 ½"(~38mm) for the 1" foot with a m10x35mm bolt.  The maximum height may be increased by purchasing longer bolts if needed.

As far as printing goes, i printed in PETG at 30% infill with 4 walls(important for strength).  The bolts are designed to be a tight fit in the printed parts, so if you are having problems with the bolts either being too loose or not fitting, then slight scale adjustments can help.  

As with anything I make, feedback is appreciated.  Thanks!

Read more Show less

Print spec

Formats
3mf
Model files
4
Total size
688.2 KB
Largest file
276.9 KB

0 comments

See all