Chân Chống Trục Axial SCX6

Axial SCX6 axle stands; separated by front and rear (since they're different). My goal was to have the strength to hold up a ~28 lbs truck, but use as little filament as possible.

You'll need to complete, two rear verticals (they're interchangeable) and the driver & passenger front verticals (these matter). Along with a front and rear brace (they're different as well).

You'll also need 4 x M3x20mm cap head bolts and 4 x M3 nuts to hold it all together. The tolerance on the fitment is 0.125mm on every side, so fitment shouldn't be an issue for the center braces.

Update (1/13/24): Thanks everyone for all your feedback. I've gone back and re-built the model and improved quite a few aspects. I've also fixed the spacing for the rear. So if you printed the HD version, you can re-download just rear brace and that'll sort you out. 

Update (9/10/22):  Added “HD” (heavy duty) versions of each item. Thicker cross brace (8mm vs 5mm), deeper inset for the braces and the verticals have slightly larger feet.

Notes: 

You'll want to print the uprights with the screw facing holes down as supplied. Add support in your slicer for the screw hole inserts on the verticals and you're good to go. 

New - Looking to get these stands, but don't have a printer? Checkout my Esty Store!