Skip to main content
F3D
Ống Dẫn Quạt Mặc Định EVA 3.0 Beacon Rev H 1

4 images

Máy In 3D

Ống Dẫn Quạt Mặc Định EVA 3.0 Beacon Rev H

Remix of Ống dẫn khí EVA 3 Beacon Probe Mặc định / HF Ducts By FabreekoSpeed_628081

By KR_259774

Downloads
103
Likes
9
Views
881

Files 1 10.4 MB

  • Beacon_Fan_Duct_1765806271.stlSTL · 10.4 MB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#115328
Category
Máy In 3D
Published

Description

This is the standard fan duct (Bottom Horns, as mentioned on the EVA site) with mounting holes for the Beacon Eddy Current Surface Scanner Rev H. 

Updated the height of the mounting platform to allow for the recommended 2.6 mm clearance between sensor and nozzle. This results in not enough room being available for heat set inserts for the beacon mount, so changed the mounting hole sizes to 3 mm. The hole for connecting the fan duct to the fan shroud still uses heat set inserts.

DO NOT use heat set inserts for the beacon mount. The M3 screws will cut their own threads. Recommend using 6mm M3 screws.

Offsets: X: 0, Y: 16.98

Note 1: The USB connector housing on the Beacon will have to be de-soldered and the cable directly soldered to the beacon as there isn't enough clearance even with the low profile version.

Note 2: This is only for the Beacon Rev H Low Profile version and may not work with Rev D without additional modifications.

Read more Show less

Print spec

Formats
stl
Model files
1
Total size
10.4 MB
Largest file
10.4 MB

0 comments

See all