Công tắc bàn đạp chân

Remix of Bàn đạp công tắc chân By OK1HRA_5209

By flummer

Downloads: 389
Likes: 70
Views: 2,010
Remixes: 0
Comments: 0

Download all (.zip)· 3 files · 269.5 KB· 269.5 KB

Files 3 269.5 KB

3d-ptt-foot-switch_1765797168.scadSCAD · 3.7 KB
3d-ptt-foot-switch-d3v-flat_1765797169.stlSTL · 128.5 KB
3d-ptt-foot-switch-d3v-spikes_1765797169.stlSTL · 137.3 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #114997
Category: DIY
Published: 12/15/2025
License: Creative Commons — Attribution — Share Alike
Tags: switch
electronics
pedal

Show more tags Show fewer tags

Description

This remix fits a larger microswitch like OMRON D3V-11-1C4 or similar from other brands.

Compared to the original design, this uses a heat set brass inserts (M3) and a 14mm M3 screw to secure the switch in place, making it possible to print this unattended and also making it a bit easier to solder on a cable.

I have printed this in PLA with 60% infill and that seem to work pretty well, feels solid and flexes nicely.

This type of switch is relatively loud with a clear click.

The design files have a little bit more space for the connection pins at the end of the switch compared to the one I printed, as I had to cut the pins down a little to fit the switch.

If you want to change size, url/text, switch type, etc. please open the OpenSCAD file and change the settings in the “Input parameter” section in the top.