Niêm phong cửa ngắn cho P1S

Remix of Niêm phong cửa X1C/P1P cho máy in 3D By Jai gantic gantic

By Sareem

Downloads: 0
Likes: 0
Views: 0
Remixes: 0
Comments: 0

Download all (.zip)· 4 files · 1 MB· 1 MB

Files 4 1 MB

Door_Seal_-0.8mm_1766951426.stlSTL · 477.7 KB
Door_Seal_-0.8mm_1766951427.stepSTEP · 53.2 KB
Door_Seal_-1.0mm_1766951428.stepSTEP · 53.6 KB
Door_Seal_-1.0mm_1766951429.stlSTL · 474.3 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #11360
Category: Máy In 3D
Published: 03/11/2025
License: GNU General Public License v2.0
Tags: x1c
p1p
p1s

Show more tags Show fewer tags

Description

I liked the door seal created by Jia gantic but it did not fit right on my P1S - it would bind in the hinge if the door was fully opened.

This remix cuts 0.8mm off the top of it and brought the legs closer together at the bottom for a tighter fit. It still fully seals on the edge but no longer binds for me…

I also uploaded a 1mm cut version BUT have not tested this version.

If this is still binding, you could try scaling the Z axis to 90 or 95%…

Equipment/settings:

P1S
Bambu slicer
0.4 nozzle
Black PolyMaker PolyFlex 95a TPU
Default generic TPU profile with retraction tweaks
- 2mm retraction
- 45mm/s retract
- 20mm/s deretraction
- 1mm distance threshold
Printed in silent mode
Bambu gold textured PEI plate with glue stick

Sorry for the bad photo - photographing these black filaments on a black printer is tricky…