Skip to main content
F3D
Pát Gắn Mặt Bàn Cho Kệ Muscle Rack 1

2 images

Đồ Gia Dụng

Pát Gắn Mặt Bàn Cho Kệ Muscle Rack

By MilkPillows

Downloads
59
Likes
13
Views
530

Files 1 132.4 KB

  • muscle_adapter_1765794846.stlSTL · 132.4 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

I was doing a rework of my workshop and had an old muscle rack that i thought could make a good table for my printers, i designed this bracket to allow me to use a few countersunk wood screws to attach a work surface. It should also work on the many clones of muscle racks seeing as they all use similar dimensions. Just slot the brackets onto each corner, place a surface on top and install some screws. You may need an extension on your drill/impact driver.
You absolutely need to print this with at least 4 walls, 5 top and bottom layers and at least 25% infill, use an appropriately strong and rigid material and optimize your print settings for layer adhesion, in my case i used petg with part cooling turned off and printed at 260c.   

I hope this is useful to someone!

Read more Show less

Print spec

Formats
stl
Model files
1
Total size
132.4 KB
Largest file
132.4 KB

0 comments

See all