Giá đỡ cuộn dây cho Prusa Mini+

Prusa Mini+ spool holder

This is a fusion of a couple spool holders and it can be quickly installed & removed; as it's designed to be attached to the Mini without screws, and doesn't pinch the control panel's ribbon cable.

For assembly, you'll need a couple of 608Z bearings and a single M4x20mm screw (I recommend using a M4x20mm screw, but you can use a M4 screw sized between 12mm to 22mm long.   Alternatively, you could just epoxy the Spindle Holder to the Bracket).