Khóa Tạ Đòn Đơn Giản - Dễ Lắp Ráp

MacialT has made a fantastic barbell collar for us to use, but I and many others found that it causes you to start your workout early, driving a bolt and cutting threads in components to don't need to be threaded. This remix minimizes the amount of threads that need to be cut, by the bolt, and allows the bolt heads to sit flush with the body on the majority of components.

I believe that the original MacialT collar is slightly tighter, but I have used this collar on 250lb+ deadlifts, that being said:  Use this at your own risk.

I recommend printing in PETG, ASA, ABS, or PC as it is more resistant to creep than PLA.

Happy printing, and happy lifting!

Assembly notes:

• Small hole on components 7.2/7.3 should be as far away from each other (in circumference) during assembly, to reduce quantity of M4x35 bolts to 2x.
• The larger/labeled hole of component 3 should align with the hole of component 5 (thick doughnut).