Skip to main content
F3D
Pat Giữ Thanh Ray Hàng Rào Vinyl 1

8 images

Đồ Gia Dụng

Pat Giữ Thanh Ray Hàng Rào Vinyl

By MReynolds

Downloads
38
Likes
3
Views
227

Files 2 1.1 MB

  • Fence_Rail_Tie_1765769524.stlSTL · 859 KB
  • Fence_Rail_Tie_-_1765769524.stlSTL · 282.5 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

(For 5” Vinyl Fence Post) Attach the rail tie inside the post after the rail has been installed to add strength and durability to the post and rail system. This will help prevent the rails from backing out in high winds. I attached with #12 2-inch self-tapping screws. The design incorporates a trough for custom screw placement and a thin layer for the screw to punch through before driving into the rails. 

Print these in lieu of buying plates for each post. I used PETG.

The first file (Plus '+' shaped one) is for corner or t-posts but can be used for in-line posts as well. The second file (flat '-’ shaped one) is for in-line posts. 

Print as oriented and install upside down. No supports needed as there are clean bridges.

Read more Show less

Print spec

Formats
stl
Model files
2
Total size
1.1 MB
Largest file
859 KB

0 comments

See all