Skip to main content
F3D
Vòng bảo vệ cáp cho giá đỡ EQ6R Pro của Skywatcher 1

2 images

Dụng Cụ Tiện Ích

Vòng bảo vệ cáp cho giá đỡ EQ6R Pro của Skywatcher

By dagerber_213612

Downloads
34
Likes
10
Views
941
Comments
2

Files 1 210.1 KB

  • EQ6R-Fangschutz_v17_1766465689.3mf3MF · 210.1 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

When using the EQ6R Pro mount in a fully automated setup, there is a risk the cables get caught on one of the handles.

This is a big problem with fully automated setups, that run unattended through a whole night (possiblity with a “Meridian flip”).

This 3D printed parts hold a ring (to be bought separately) that prevents the handles from catching the cables.

Once assembled, the ring can be “clipped” on the handles within seconds, no tooles needed.

See (in the video I used  a ring with a length of 100cm, I later shortened it to 78cm)

The following parts have to be bought separately (the link provided is just an example, I'm sure you can find similar parts in any part of the world):

Part

Dimensions

Quantity

Link

Ring

25mm x 2mm (length = 78cm) - Plastic

1

https://www.obi.de/stangen/flachstange-weiss-2-mm-x-25-mm-x-1000-mm/p/9589391

Hex nut

M5 x 20mm

3

https://www.obi.de/sechskantmuttern/lux-sechskantmutter-m5-verzinkt/p/6387021

Screw

M5 x 20mm

2

https://www.obi.de/gewindeschrauben/lux-zylinderkopfgewindeschraube-m5-x-20-mm-verzinkt-schlitz-8-stueck-mit-muttern/p/8686701

Screw

M5 x 12mm

(or M5 x 15mm)

1

https://www.obi.de/gewindeschrauben/lux-zylinderkopf-gewindeschraube-m5-x-12-mm-edelstahl-schlitz-8-stueck-m-muttern/p/8687048

Print with

  • PLA
  • 100% infill

Read more Show less

Print spec

Formats
3mf
Model files
1
Total size
210.1 KB
Largest file
210.1 KB

2 comments

See all