Skip to main content
F3D
Máy Vẽ A3+ (Board Điều Khiển EBB) 1

19 images

DIY

Máy Vẽ A3+ (Board Điều Khiển EBB)

By nicom1234_72049

Downloads
311
Likes
101
Views
4,893
Remixes
1

Files 12 20.8 MB

  • Linear_bearing_spacer_left_1766000023.STLSTL · 293.8 KB
  • Axidraw_pen_slide_1766000024.STLSTL · 158.1 KB
  • X_support_HOME_1766000025.STLSTL · 420.1 KB
  • X_support_cover_board_mount_1766000026.STLSTL · 67.7 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Description

DIY A3+ Drawing Machine (using the EBB Driver Board)

*update: Bottom_XY_clamshell_V3 (this allows the flanged bearings to be raised by 2mm to prevent the timing belt rubbing on the linear rods)

This 'Drawing Machine'/ Cartesian Plotter is based on the 
AxiDraw from Evil Mad Scientist and uses their EBB Driver Board to control the steppers and servo for simplicity - it's great for a first time user of plotters, like me and I find it incredibly user friendly when used with 
Inkscape.

As a starting point, I used henryarnold's files and modified them to allow the machine to be fixed to a board, strengthened in some areas (as my machine is larger) and added stepper covers to be more in keeping with a finished product. I won't be including instructions, as henryarnold provides a great PDF to follow already (and I also think that by looking at the photos and complete assembly file I've included, the construction is quite self-explanatory.

To keep the servo wire out of the way, I used a piece wire (actually taken from an RC plane push rod). One end is trapped between the servo screw and 3D print and the other end has the servo wire taped to it, to keep it suspended in the air.

Supplies:

Servo Extension Lead 26 AWG, 800mm, QTY 1 #### A few tips:

##### There is an opening at each end of the aluminium extrusion, even after the 3D print is bolted on - this is to hide the cables in.

##### Depending on what brand of threaded brass heat inserts you buy (or the outside dia), pressing them in may cause some of the thin walls of the plastic to bulge out. They will still work out in the end.

For setup, just go through the very useful The AxiDraw User Guide

Printer Brand:

Prusa

Printer: 

I3 MK3S

Rafts:

No

Supports: 

Yes

Resolution:

0.15

Infill: 

25

Filament:
Prusament PETG + PLA Orange + Galaxy Black 
 

Notes: 

PETG for main components

* 0.15mm Layer Height

  • 25% Infill
  • Brim
  • Support on build plate

Ironing on PLA for stepper covers

0.10mm Layer Height

  • 15% Infill
  • Brim
  • Support on build plate
  • Ironing on

Category: Robotics

Read more Show less

Print spec

Formats
stepstl
Model files
12
Total size
20.8 MB
Largest file
17.7 MB

0 comments

See all