Giá đỡ GoPro Bomber DJI Action 2 (cập nhật v7)

Update 2024-01-04: New _**Version 9**_! AKA “r4”. New LCD protection insert, new redesigned front face with more lens protection, even better camera retention.

Update 2023-10-10: New _Version 8_! Better camera retention & fit.

Update 2023-02-03: New _Version 7_ folder with all EIGHT variations now uploaded.

Update 2022-10-11: New _Version 5 - new TBS ND version_ folder with two new versions!

Update 2022-06-22: Major updated version: V3! Also see the Bolt-Down Drone version! I've uploaded all four ND filter variations as well.

Update 2021-11-12: New Slide-In Version. For TPU only, the recommended version. 

Update 2022-02-12: Added version for TBS ND filters with it's own slot

Update 2022-01-30: New Slide-In v2, now with more protection and style

An actually secure mount for your Action 2

Don't want your new $500 camera go flying after a crash? After you wipe out on your snowboard? This will make it as bomber as you can get.

Print Settings

• Print with TPU filament, slowly
• Use tree support if your slicer supports it
• Best printed on its side (as oriented in the STL).
• Use 2 perimeter walls for most setups. 3 walls for bando bashing.
• Infill: Use 20 - 30% infill.
  • 20% gyroid infill for cinematic / long range setups. 
  • 25 - 30% cubic infill for bando bashing
  • Really don't go above 30% infill, it just adds extra weight but no strength benefit.
• PRINT THE BACK GLASS PROTECTOR.stl in PLA/PETG/etc! Something rigid! The back LCD is the most fragile part and easily broken without this part!
  • Glue into the recessed spot on the back of the mount. Use whatever glue you like, CA/suer glue, hot glue, etc.

Post your makes!

Please post 'em! Really! Take a cameraphone photo with your dope color matched mount in all its glory and show it off! Plus it really helps get this design out there to the world.

Message me on discord/telegram for

• customizations
• different engravings
• different variation ideas
• any issues: printing, design, fit, etc
• to show off / geek out about your result
• say howdy

Designing stuff is fun but interacting with cool people and hearing about their adventures is better. I can generate any variation / engraving easily, message me on discord/telegram and/or leave a comment and let's make your perfect mount. I only ask that you post a make!

If you'd like the CAD or STEP file too, no problem. Message me.

Bracket version can be printed rigid! (PLA or ABS)

The thinner versions are flexible enough to work with rigid plastics. Use the thicker version for TPU.

Fly it on your Quad/Drone

If you're mount this to a quad then check out my bolt-down quad version too!