
Khay pin ngắn RC 1/8 Xray XB8E
- Downloads
- 88
- Likes
- 3
- Views
- 492
- Remixes
- 0
- Comments
- 0
Files 3 1.8 MB
- TrayMiddleM4ThreadInserts_4mm_1765752296.stlSTL · 200.6 KB
- TrayWasher_00_1765752297.stlSTL · 203 KB
- TrayClip_M4ThreadInsert_v02_1765752298.stlSTL · 1.4 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #101380
- Category
- DIY
- Published
Description
I wanted to have a bit more space to mount electronics in my Xray XB8E 2022 buggy.
I designed this battery tray which can be mounted with longer M4 bolts.
The battery of “shorty”-size is held tight in place in a centre position, so not to the rear or to the front, so you loose the posibillity to switch the battery-position (which needs a partial rebuild of the original battery-trays anyway.)
My first prototype was printed in PETG … and did not hold very long.
I printed a second edition out of PA with CarbonFibers …
The CF made the print easier as it prevented warping which is typical for PA (nylon).
So, use the correct filament, make it a strong print: more walls, finer infill, … !
That second prototype has now hold 1,5 year of competition and training abuse, without any issues.
The clips have to be provided of al M4-tread-insert (see CNC-kitchen https://cnckitchen.store/collections/threaded-inserts )
*****
TIP: the original battery-tray(s) have two spacers on the bottom.
For printing-facility I made these spacers as a seperate object.
So you will need:
- 2 trays
- 4 clips
- 4 spacers
ALSO:
- 4 longer m4-bolts
- and some m4-threaded inserts for the clips
final tip: do use an extra velcro-band to secure the battery tightly.
Print spec
- Formats
- stl
- Model files
- 3
- Total size
- 1.8 MB
- Largest file
- 1.4 MB
0 comments
You may also like 12 models
See all-
New -

-

-

-

-

-
New -
New -
New -

-

-
New

