CHÂN ĐẾ BUMPER XE SHERMAN CỦA CỰU CHIẾN BINH

Visit my Cults3D page for more designs

The bumper will click in place right over the arch of the front shell. Add velcro or double-sided tape as seen in the pictures to ensure a secure connection.

For the one piece design :
- I recommend printing it in TPU with at leats 5 wall and a high infill percentage.
- Printing it in PETG might also work but I haven't tried it

For the three pieces design :
- Print the main part in PETG and two TPU nubs with the recommended settings below.

For TPU :
- 4 bottoms
- 5 tops
- 4 perimeters
- 10% infill - Triangle
- Print with the hole facing up

For PETG :
- 3 bottoms
- 6 tops
- 4 perimeters
- 15% infill - Cubid
- Supports : Yes