Miếng Đệm Lót "Power Pads" Cơ Bản Cho Xe EUC

Visit my Cults3D page for more designs 

This is a simple design for people wanting basic power pads.

To give you an idea of the size, there is around 210mm between the brake pad and the front pad at the top and around 190mm at the bottom.

The whole pad will fit onto the bed of any regular printer like the prusa.

The file provided is for the right side of the wheel, print a mirrored copy for the left side. Attatch to your wheel with industrial velcro

Here are the main settings I use to print the pads with TPU on the Prusa MK3S+
- 2 bottoms
- 5 tops
- 2 perimeters
- 10% infill