KINGSONG S18 SUSPENSION SEAL HOLDERS

By CDoucet

Downloads: 32
Likes: 9
Views: 357
Remixes: 0
Comments: 0

Download all (.zip)· 2 files · 662 KB· 662 KB

Files 2 662 KB

Left_Side_1765748180.stlSTL · 305.2 KB
V2_Right_Side_1765748182.stlSTL · 356.8 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #100235
Category: Thể Thao & Ngoài Trời
Published: 12/15/2025
License: Creative Commons — Attribution — Noncommercial — NoDerivatives
Tags: suspension
euc
s18
gyroroue
kingsond

Show more tags Show fewer tags

Description

Visit my Cults3D page for more designs

There are two different files, one for the right side of the wheel and another one for the left side, where the cable cover is. No need to take the cable cover off.

You will need 4x m3x12 bolts

How to attach : Remove the original phillips screws, slide in place the holders and attach with the new m3x12 bolts. Note that you will need to use a bit of force to slide the holders in place but they will not break if printed properly.

Here are the main settings I use to print the pads with PETG
- 4 bottoms
- 6 tops
- 3 perimeters
- 15% infill
- Supports : Yes for the underside of the screw mounts