Tiêu đề Đầu nối IKEA Kallax Tóm tắt Bộ phận nối 2 kệ Kall

These parts cover the screws connecting two Kallax as shown in the pictures. I found this is the best way to get a stable connection, while not interfering with any boxes stored there. You'll need 4 M5x80 screws and 4 M5 half-height hexnuts (full height would be pointless anyway because the screws stick out only 3 mm). To get a nice even gap you can just glue two of the felt bits that come with the shelves between the two Kallax near the top of the gap. Make sure to solidly clamp the shelves together before drilling. You can use supplied jig to get the same offset in all corners.