Tiêu đề Kho chứa dây tóc - Đứng tự do Mặt phẳng Tóm tắt

This is a slightly modified version of the free standing filament storage rack by @JohnMartin.

I am using 1.2m Wooden Dowels with my build so I wanted to add one of these to the middle fo the dowels to give it some support, but didn't want it to have curves on one of the sides so I quickly modified the model in Fusion360.

It is printed with the below settings:

• Nozzle: 0.4mm
• Supports: None
• Layer Height: 0.2
• Infill %: 15%
• Infill Type: Gryoid
• Brim: None
• Supports: Yes
• Support Type: Default

On my BambuLabs P1S it took about 3 hours to print at 200mm/s

All credit goes to @JohnMartin for his great models.