Tiêu đề Bo mạch chủ gắn trên bảng điều khiển Tóm tắt Cá

VHB tape, standard Voron heatinserts and M3 screws of your choice are needed.

Instructions:

• Print 4 mount pieces. The one with offset hole can be used for BTT Manta M8P corner that has camera/display cable plug.
• Insert heatinserts into each hole.
• Put VHB tape on each mount piece.
• Screw each mount piece with motherboard.
• Position and put motherboard with mount pieces on panel, press and hold it for 15 seconds.
• Done!

Next time, you just unscrew screws. Mount pieces stay on the panel.

This mount method works very well. Using it on two Voron0 for few months now without any problems.