5Kg Spool Roller

Filament spool roller for Zyltech 5kg filament spools.

Hardware required:

• 4 - m3x16 (or longer) bolts
• 4 - 608 bearings

Print tips:

• 1 - SpoolBase
• 2 - SpoolFrame
• 2 - SpoolRoller

No supports required but you may want to use a brim for the SpoolRollers which print on end, especially if you use a bed slinger. I used a .6mm nozzle with a .4mm layer height which prints faster but that is not necessary.