Tiêu đề Giá đỡ và tấm servo gắn bên cạnh Tóm tắt Được

I don't like to glue my 9 gram servos in place for flaps or ailerons in case I ever have to remove one so I came up with a little mount and plate. I glue the plate in place , put the servo in a mount and attach it all with servo screws. Easily painted in whatever colour the aircraft is. The screw holes are 1.5mm so you may have to drill them out to accommodate whatever screw you're going to use.

Print with the box opening laying flat. That way you won't need any support, raft or brim.