Tiêu đề Chất tẩy SNOmadic Tóm tắt chất tẩy tuyết cho mái nh

this is a snow remover for a home or building to help get snow off a roof. you will need to cut a tarp to fit around the rods to help get snow off roof so they snow wont fall into a gutter.

this is design to fit on a standard paint roller thread or broom handle thread. but someone could use those extended poles also. i have test-printed the threads for a handle design. i have a neptune 4 max. this is 353 mm wide. 100% infill is best.

i am going to upload some drawings to show how the tarp will wrap around the poles for people. but to describe it. the tarp raps around the brown rod aka longer rod then both layers of the tarp go under the purple aka shorter rod. then the holes on the end are for clips or paper clips something to hold them in the scraper part. then you tarp can be as long as you want to get the snow off your roof and not have to pay much $ and maybe use old tarp you have already.

the sled rails are for when you might be digging into shingles. or screws on a roof then the wheels are for the longer rods to help if you are in a scenario you need more clearance for like metal roofing and don't wanna hit the screws but need to get that snow load weight off the roof. the rails are removable and are tighten from the back to create a small pressure to hold in place.

i even provided a lil tool for the threads but someone could just use a screw driver.

i have used other models from amazon before and they always seem to break and become worthless and then stuck on the roof in the winter until things thaw to climb up. grr.