Tiêu đề Magpen - Mặt dây chuyền có thể thay đổi từ tính Tóm

This "Magpen" System will allow for an easy exchange of pendants, so it will always fit the occasion!

The first pendant is a hexagonal one, with variable Infill patterns.

Important!

For this to work, you have to change following setting for the Infill part of the pendant:

• 0 top and bottom layers
• 0 walls
• I turned of the anchor Infill setting too, so it looks cleaner
• Infill about 5-15 %, just experiment with it :)
• Look at the sliced file and confirm, that the infill reaches slightly into the rest of the pendant. If not, resize only the Infill part by about 1-3 %
• You'll need support for the Base

After printing glue in two 4x2 mm magnets and mind the orientation!

Depending on the size of your Necklace it can be necessary to include it while printing. Simply pause the print before the eyelet closes, insert the necklace and continue the last few layers.

If you need help, just ask :) And if you like it, please leave a like and a make!

Edit: Attached a .3mf file for Bambulab X1C printers with PLA