Joint Case
Trường hợp khớp trượt từ tính có thể chứa tới 3 hình nón Kingsize.
1.1K
Lượt Xem
22
Lượt Thích
168
Lượt Tải
Cập Nhật Nov 22, 2025
Mô tả
Holds up to 3 kingsize cones. Use support only for the leaf, and brim for better plate adhesion. I used 2 round magnets (10x3) so the sliding part does not fall out of the case, but I assume you could still use it without magnets. Please show me yours if you have printed it!
Printed on 0.2 layer height and 15% infill.
Giấy phép
Tác phẩm này được cấp phép theo
Creative Commons — Attribution — Noncommercial — Share AlikeCC-BY-NC-SA
File mô hình
Đang tải files, vui lòng chờ...
Vui lòng đăng nhập để bình luận.
Vui lòng đăng nhập để khoe bản in của bạn.
Chưa có bản in nào được khoe. Hãy là người đầu tiên!
Chưa có bình luận nào. Hãy là người đầu tiên!