Tiêu đề Nắp cuối cho đùn nhôm EX-1030 Tóm tắt Nắp cuối cho
Kết thúc nắp cho Ex-1030 nhôm đùn, cũng phù hợp với 80/20 #1030, T-SLOTS #650001 & McMaster #47065T511
Mô tả
These are the End Caps I created for the aluminum fence extrusion I used on my mitersaw bench. They are a nice tight fit so they won't fall out. This extrusion is 1" x 3" and it is available from the following link https://www.tnutz.com/product/ex-1030/
In the Fusion 360 file (.f3d) there are sketches for EX-1010, EX-1020 & EX-1030 extrusions, so you can easily create an End Cap for those as well.
Print Info
Filament: eSUN PLA+
Printer: Prusa MK4 with Input Shaper, .4mm nozzle
Layer Height: 0.2 mm, Structural Profile
Layers: top 5, bottom 5
Seam: rear
Perimeters: 3
Infill: Grid, 20 %, anything will work
Supports: None
Giấy phép
Tác phẩm này được cấp phép theo
Creative Commons Attribution-NonCommercial 4.0 InternationalAttribution-NonCommercial
