Tiêu đề Mèo đen trắng In nhiều màu Katze in Schwarz Weiß Huefor

I printed it on my Bambulab P1S in about 2,5h with AMS.

It came out beautiful on my first try.

I used eSun PLA+ Filament in Black, White and Silver (Grey can be used too)

Layerheight 0,08mm (Extra Fine Profile Bambu Studio)

Base Layer 0,2mm

100% Infill

Start with Black, the Filament was swaped:

at layerheight 0,6mm in my case layer 6 (from Black to Silver/Grey)

at layerheight 1,0mm in my case layer 11 (from Silver/Grey to White