box for ruthex heat set insert tips

This box is suitable for the ruthex heatset tips: https://www.ruthex.de/products/ruthex-lotspitzen-einschmelzhilfe-m2-m2-5-m3-m4-m5-m6-m8 The cover is printed in Prusament PETG transparent. The Box is printed in Prusament PLA “Oh my gold” To make the cover as transparent as possible, make your line with as wide as you can. (I used 0.6mm on my 0.4mm nozzle) The Box has no special print settings. I recommend to print in 0.15mm layer height and 3 perimeters to look nice (but this is not required) See also my other workshop stuff: <https://www.f3d.vn/profile/antimaterie additional notes I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes. If you post a make, let me know which filament you use. If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models. In general my Prints are not for commercial use, but if you are a print farm owner and want to sell some of my stuff, please contact me. Hope you enjoy my models.