Gridfinity Filament Vacuum Seal Bags Accessories Holder
Một thùng 1x2x6 để giữ một máy bơm chân không cầm tay thủ công (có đầu/đầu cao su) và hai clip niêm phong.
435
Lượt Xem
13
Lượt Thích
40
Lượt Tải
Cập Nhật Nov 22, 2025
Mô tả
Nội dung được dịch bằng AI
Holds all accessories for “3D Filament Moisture Proof Storage Bags” purchased from Microcenter. Link to product:
Made to full Gridfinity specs. Contains 6mm x 2mm magnet/screw holes and lip for stacking. Tolerences for holes are ~1mm (to allow for printing on machines with poor tolerances), so items drop into place easily, but are held deeply enough that they will not fall out.
Printed in ASA, 10% infill, 0.4mm nozzle, 0.2 layer height, 2 shells.
Giấy phép
Tác phẩm này được cấp phép theo
Creative Commons — Attribution — Noncommercial — Share AlikeCC-BY-NC-SA
File mô hình
Đang tải files, vui lòng chờ...
Vui lòng đăng nhập để bình luận.
Vui lòng đăng nhập để khoe bản in của bạn.
Chưa có bản in nào được khoe. Hãy là người đầu tiên!
Chưa có bình luận nào. Hãy là người đầu tiên!