Tiêu đề Ice Duster ScraperScooper - 2 in 1 có Tay cầm Tóm tắt C

I printed it with 20 % infill on PETG. I had low filament level so I printed the first few layers with PLA different color as seen. I recommend using one filament for best adhesion.

For the Gcode version I added tree support with minimal infill easy to remove even if it is printed with PETG. The Gcode works well both with PETG and PLA.

For .STL version, if you do not like using support, I recommend having good bridging settings for the handle part, although I would recommend support since the handle requires strong adhesion.