Tiêu đề Ổ cắm điện có nắp đậy Tóm tắt Vỏ bọc phích c

Use: These electrical plug covers are used to protect the metal prongs from the elements.

Design: One design is for US standard 120vac 2 prong plugs and the other is for US standard 120vac 3 prong plugs.

Assembly: In order for the loop on the tether to be installed over the plug the material needs to be very flexible like TPU. I used Ninja flex TPU and it worked very well for assembly.

1st stretch the loop of the tether over the metal prongs. Then pull hard on the tether and stretch the loop over one corner of the plastic plug. Then while stretching the loop pull the tether around the next corner of the plug and continue rotating the loop around the remaining corners while pulling on the tether.

Print Settings:

Supports: No

Infill 30%

Material: TPU-Ninjaflex 85A or similar

Resolution: 0.2